section of round diffuser

It is used to anti-ice the air inlet  round diffuser  the engine, heat the cabin, defrost the windshields and power the engine/transmission oil cooling fan. Engine anti-icing is accomplished through a “fail safe” anti-icing valve located in the tube between the bleed air adapter and inlet housing port. Fail safe means electrical power is required to keep the valve closed. The valve is controlled by the anti-icing switch on the engine control panel.and a diffuser miter  the diffuser. For example, in providing aroom or the indoor air inlet, which in its side of the air .Replacing An Air Diffuser Recently Single grille  our Kenmore Elite side-by-side refrigerator was warm while our freezer was nice and cold. I diagnosed the problem as a defective refrigerator air diffuser .

After doing some research I was confident that the air diffuser and possibly the thermistor were broken and needed to be replaced. I ordered both pieces from Sears PartsDirect and they were delivered today.  The outer housing contains the three mounting pads and a “piggy back” bleed air collector chamber that augments the bleed air stored in the hollow annulus around the centrifugal compressor housing.Bleed air is hot compressed air which Double grille is bled from the engine diffuser section just prior to it entering the combustion chamber. The air is stored in the piggy back chamber and hollow annulus in the centrifugal compressor housing. The air diffuser section is bolted to the compressor section and consists of an inner and outer housing separated by welded stationary vanes. The vanes have been designed and shaped to slow the high velocity incoming air and convert it into pressure. It also changes the radial air flow direction to longitudinal flow before directing it into the combustion section. The inner housing supports the main bearing.

http://pouwaterdispensersz.easyjournal.com/

http://airdiffuser.blogbus.com/